Technology of laying gypsum tiles with your own hands

Gypsum tiles must be laid properly, as not only the aesthetic appearance of decorative facing, but also the service quality of

this substance will be based on the technology of job. The product is more universal, and it may be connected to plaster,

concrete, brick or gypsum board sheets, provided the top layer of the foundation is and has no defects.

If the defects of this base are important, it ought to be completely treated with primer, then a cement mortar is created, which

matches all of the cracks. Then the surface ought to be primed and dried. In this case, its composition should pick a special,

containing elements which stop the appearance of fungus and mold.

In today’s interior of these rooms most frequently used gypsum tiles, even imitating natural stone or brick. To perform decorative

finishing your self, it’s essential firstly to pick a scheme of tile positioning and prepare a solution. It is necessary to look

closely at the reverse side of the substance. When its surface has an embossed surface, then the adhesive ought to be placed

having an trowel, also if it is even, then using a top notch one.

The technology of this work is as follows:

* A thin coating of glue is put on the pre-prepared wall. It is spread over the foundation so that it is likely to place 4-5

tiles. Decorative cladding can be put either on plasterboard, also on putty.

* Cover the rear side of the tiles with adhesive.

* Plaster elements are pushed against the wall and their place is corrected. To align the seams, it’s recommended to use


* Finishing is carried out in rows, all which ought to be changed by half a tile. Facing is carried out into the corners of the

room, then immediately eliminate any remaining mortar in the joints.

Drying the walls takes no longer than a day and demands a constant humidity and temperature in the room. The final point in the

laying of gypsum tiles is that their decoration. To do this, the joints between the elements are filled with a particular

solution, the shade of which matches the brick.

Cosmetic fake of brickwork on the walls is completed in the following ways:

* Cutting the darkened surface of the seams of masonry using a bolt cutter with your own hands;

* laying of tiles beneath the brick:

* mimicking the format and colour of the side of one brick;

* Imitating a fragment of brickwork of many bricks.

The best approach to decorate”under the brick” is really the one which permits you to create a functional coating together with

the maximum appearance of its resemblance to organic masonry. All three methods to perform this kind of finishing functions

fulfill the requirements, but the cutting edge of joints using a bolt is labor-intensive as well as the formation of considerable

amounts of dust, so let’s consider more ordinary manners.

The old finish is removed from the walls, and the surface, if needed, is leveled to eliminate the need to glue plaster on a thick

coating of adhesive.

Combining these cladding with different types of interior finishes can be both orderly and done with no clear consistency,

chaotically, with fake of signs of aging.

With the help of decorative gypsum tiles it is possible to mimic a large number of textures.

A large number of textures can be imitated with the help of cosmetic gypsum tiles.

The wall on which it’s to be set up should have the following attributes:

* Hardness and intensity of the outside;

* The absence of irregular areas and sharp differences;

* not any deformations.

Decorative tiles at the interior of this kitchen

Walls are made from a variety of materials, let’s break down the individual rules of installment.

When dealing with concrete, there’ll be no huge problems. It’s simply required to take into consideration the porosity of this

material. Concrete, that has practically no pronounced pores, should be treated with a fantastic primer.

Mounting gypsum tiles concrete

Before starting work on the installation of gypsum tiles in the walls, it’s well worth checking the strength of this surface.

After the plaster doesn’t fall off the wall and in exactly the identical time holds well, it’s possible to simply paint it with


Mount the tiles on the painted concrete should not. The surface ought to be scratched, making sure to misfire, and it ought to be

grouted and covered with a layer of plaster.